
5 of 9
CAV6.6/CAM6.6 PROGRAMMING
Once the equipment is installed and connected you must program the CAV6.6/CAM6.6 according to
Russound guidelines. Special steps that relate to ELAN are provided below:
I
MPORTANT NOTE:
To avoid any conflict or odd behavior disconnect the serial cable from the ELAN controller prior to
programming the Russound devices.
M
ULTIPLE CAV6.6 UNITS
If you need more than 6 zones, you can add additional CAV6.6 units: the maximum number of CAV6.6
units is 6, which delivers audio in up to 36 zones.
When you configure the CAV6.6 in the ELAN system, you will need to know the Controller Number for
each. Set the Controller Number for the first CAV6.6 to 1, the second to 2, and so on.
ST2
AM/FM, XM, SIRIUS TUNER SOURCES
If you have a ST2 tuner, then you will need to know the Tuner ID for each tuner. Since each ST2 has two
built in tuners, there are two IDs that you must know for each ST2.
In addition, the Tuner ID must be the same as the corresponding source number of the CAV6.6/CAM6.6.
In other words, if a tuner is connected as source #1, then that tuner must have a Tuner ID of 1.
The ST2 factory defaults for the Tuner IDs are tuner #1 = 1, and tuner #2 = 2, which corresponds to
connecting the ST2 into the CAV6.6/CAM6.6 sources 1 and 2. For the ST2-XM tuner, the factory defaults
are the XM tuner is #1 and the AM/FM tuner is #2. For the ST2-Sirius tuner, the factory defaults are the
Sirius tuner is #1 and the AM/FM tuner is #2.
Consult the ST2 documentation for instructions on checking or changing the tuner IDs.
F
IRMWARE VERSIONS
We have confirmed proper operation of the ELAN system using several different firmware versions.
Please consult the table below. Russound does not recommend putting the latest firmware on systems if
they are working properly: contact Russound if you are not sure which version you need.
Hardware
Version
CAV6.6/CA
M6.6 Main
CAV6.6/CA
M6.6 Aux
Uno S1 Uno S2 ST2 ST2-XM ST2-
Sirius
Rev 0 1.02.02 1.02.02 N/A 3.00.01 2.00.03 N/A N/A
Rev 1 2.00.01 1.02.02 N/A 3.00.01 3.00.10 3.00.10 N/A
Rev 0,1,2,3 2.01.16 2.01.16 N/A 3.01.01 3.00.10 3.00.10 N/A
Rev 4 only 3.01.10 3.01.10 N/A 3.01.01 3.00.10 3.00.10 3.02.01
Rev 5 4.00.01 4.00.01 N/A 3.01.01 3.00.10 3.00.10 3.02.01
Russound provides separate instructions for updating the firmware for their equipment: check the
Russound Web site, or call their tech support for help at (866) 888-7466.
Komentáře k této Příručce