3 of 9
INSTALLATION OVERVIEW
1. During the rough-in phase, install speaker wire for the speakers and Cat5 cable for keypads, in each
zone.
2. Also during the rough-in phase, run a Cat5 wire from the location of the CAV6.6/CAM6.6 back to the
Network Assembly of the ELAN system for RS-232 communications. Refer to the RS-232
Connection Options Integration Note for other options.
3. Mount the speakers and keypads in each zone, and install the CAV6.6/CAM6.6 and the sources.
4. Program the CAV6.6/CAM6.6. This includes setting the number of sources, the names for each
source, and the IR codes for each source. Note: Disconnect the serial connection to ELAN prior to
programming the unit.
5. If you have multiple CAV6.6 units in the system, remember to set the Controller Number for the first
CAV6.6 to 1, the second to 2 and so on.
6. Test the entire CAV6.6/CAM6.6 system to ensure that all the sources play correctly in every zone,
and that the keypad buttons behave correctly from the keypads.
7. If the system includes one or more RNet devices (such as the ST2 tuner), they should be connected
to the CAV6.6/CAM6.6 with RNet according to the standard Russound procedure.
8. Connect the ELAN system to the CAV6.6/CAM6.6 system electrically. See the wiring diagrams for
more information. If the system includes multiple CAV6.6/CAM6.6 units or other RNet components
(such as the ST2 tuner), only the first CAV6.6/CAM6.6 is connected to the ELAN system.
9. Confirm that the “Front / Rear RS-232” selector switch located on the front of the unit is set to the
correct serial port to be used for communication between the CAV6.6/CAM6.6 and the ELAN system.
10. If the system includes an RNet tuner, such as the ST2, then record the ID for both tuners in the ST2
(the ST2 includes two separate tuners: two AM/FM or one AM/FM and one XM). This procedure is
explained later in CAV6.6/CAM6.6 Programming.
11. Configure the ELAN system for the CAV6.6/CAM6.6 and confirm communication between the
CAV6.6/CAM6.6 and the controller.
12. Test the system by changing sources in a zone to confirm the correct source plays, and by testing the
ELAN interface transport control and media server controls.
(9 stránky)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce